What Experts In The Field Want You To Know

🦄 A little bit of positivity for everyone :D

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add another key. This requires a handheld computer, called Tech-2 that is operated by the dealer. Then a new key and transponder are required to be purchased and then programmed to the car.

Make sure to rotate your keys in order to prevent one from wearing out more than another. This will also ensure that your keys remain in good condition.

Replacement Case

In contrast to the traditional Saab keys of old keys, the modern key fobs are equipped with electronics that make it difficult to make a copy. This has made stealing car keys considerably more difficult than it was years ago. However, it also has made the replacement of lost keys a comparatively expensive undertaking.

Saab 9-3 owners should have two keys that work. If one is lost it costs a lot of money to purchase a new one for the car, as it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers usually charge between $100 and $200 to do this.

There are ways to avoid these costs. Certain parts suppliers will utilize the code of a spare key to cut a new metal blade at a fraction what the dealer charges. The key must be the exact same as the original for it to function in your vehicle.

You can also replace the case yourself by following these steps. You'll require a flathead and patience. With the screwdriver slowly pry the plastic apart and separate the emergency key from the case. Once the case has been opened remove all electronics and put them in the new case. Place the key with the correct badge inside the case.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd will show you how to replace the battery in the remote key fob in only four steps. This tutorial should work with any modern Saab key fob. However, the procedure could differ slightly.

This button is usually placed just below the Saab logo on the back of the fob. It is usually located close to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the small hole on this button. This will allow you to open the case of the fob so that you can replace the battery.

Once you have installed the new battery CR1632, you are able to put back together the remote key fob. Then, you can program it into your car. The whole process should not exceed an hour. It is a simple procedure that doesn't require any special equipment.

The process is a bit more complex if you lose the key, but it's possible. The dealer needs to first determine the VIN of the vehicle and order an additional TWICE module and key blade that is matched to the unique code. The dealer will then have to program the key using MDI an innovative software tool.





Key Replacement Fob

The key fob has an internal battery that is used to lock and unlock your vehicle. The batteries are able to last for and will eventually expire. saab car key is a common problem that happens to all cars and the good thing is that you can replace the batteries in many key fobs and not have to replace the entire case. You can buy fobs replacements on Amazon that include all the electronics already installed, which means you can just pop open the case and replace the batteries that were in the case. It is important to remember that you'll need take out the emergency key first, and you can accomplish this by inserting the small screwdriver flathead into the slot located in the middle of the case. The case will split once you rotate the screwdriver around it.

When you are ready to replace your keys, ensure you have a spare as this will reduce your total cost by a substantial amount. If you do have a spare, you can ask the dealer cut a new key and program it to your car, which is cheaper than replacing the entire key fob.

It is possible to add a second key to your car even if you don't have one, but it requires some research and work. It costs around a hundred dollars to add a second car key. The computer of the vehicle must also be programmed. This can be accomplished by a professional, however it is an expensive option for most owners.

Replacement Ignition

The latest SAAB 9-3 is a more sophisticated alarm system that is based on a key code. If you lose your only key, it could be costly to replace it with another one since the car needs to be equipped with a specific computer and be programmed to accept a new key. Most locksmiths cannot do this and even dealers will charge hundred dollars to program the new key!

If you've lost your sole working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge top dollar for it. Instead we can reprogramme the EEPROM of your current car computer, preparing it to accept a second key, and save you over 50% of what you'd pay at a dealership.

If you've owned a 9-3 from SAAB for an extended period of time and you're aware of the ignition keys aren't very durable. If your ignition key is not working properly, you should think about replacing it. They can become sticky and the buttons have been known to fall off. It's good to know that replacing the ignition key isn't as complicated as it seems and is fairly easy to do using the appropriate tools.